Product Feature
1.Adopt 6 pcs Bearing Construct? ?
Adopt 6 pcs bearing construct, more high precision, performance more stable, to sure air end working more reliable.
2.Third Generation High Precision Rotors
Adopt the third generation of asymmetrical profile line, male rotor and female gear is 5:6. the gear gap is small, air return loss is small. It`s better than 4:6 gear profile line rotor and more efficiency. Increased efficiency by 10% -20% . Saving electricity 25%.
3.Enhanced Housing?
Adopt high-strength cast iron material, thickened and reinforced housing design,reduced the vibration of the air end. And extend the working life.
4.High Wear Resistance oil seal.
Adopt Japan DAIKIN high wear resistant material. And SUS304 frame. Special process, and improved leak proof performance, extend working life.
| Model |
Input speed（rpm）
|
Air output（m3/min）
|
Exhaust pressure（Mpa）
|
Motor Power （kw） |
0.8Mpa/Shaft power
（kw）
|
Special power
kW/(m3/min)
|
Fuel injection
（L/min）
|
Hot oil load（kw）
|
|
DLG15AL |
2950 | 3.71 | 0.5 | 15 | 15.9 | 4.33 | 20 | 12.7 |
| DLG22AL | 2950 | 5.2 | 0.5 | 22 | 23.9 | 4.6 | 30 | 19 |
| DLG30AL | 2950 | 7.3 | 0.5 | 30 | 33 | 4.52 | 47 | 26 |
| DLG37AL | 2950 | 8.9 | 0.5 | 37 | 40.5 | 4.55 | 53 | 32 |
| DLG45AL | 2950 | 11 | 0.5 | 45 | 49.5 | 4.5 | 67 | 40 |
| DLG55AL | 2950 | 12.9 | 0.5 | 55 | 60 | 4.65 | 85 | 48 |
| DLG75AL | 2950 | 17 | 0.5 | 75 | 82.6 | 4.86 | 100 | 66 |
| DLG90AL | 2950 | 21 | 0.5 | 90 | 99.2 | 4.72 | 130 | 79 |
| DLG110AL | 2950 | 25 | 0.5 | 110 | 120 | 4.8 | 150 | 96 |
| DLG132AL | 2950 | 30 | 0.5 | 132 | 145 | 4.83 | 180 | 116 |
| DLG160AL | 2950 | 36.4 | 0.5 | 160 | 175 | 4.81 | 220 | 140 |
| DLG185AL | 2950 | 40 | 0.5 | 185 | 202 | 5.05 | 260 | 162 |
| DLG220AL | 2950 | 50 | 0.5 | 220 | 240 | 4.8 | 300 | 192 |
| DLG250AL | 2950 | 57 | 0.5 | 250 | 273 | 4.79 | 330 | 218 |
